Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    DEM-P188913
    VOLVO

    DEM-P188913 - Oil Pressure Pump Performance. General Electrical Failures. Circuit open

    System

    Allradantrieb (DEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    8 Modelle

    S60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (8)
    • Volvo S60 (2011–)2013–2015
    • Volvo S80 (2007–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2013–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2013–2015
    • Volvo XC60 (2009–)2013–2015
    • Volvo XC70 (2008–)2013–2015

    Was bedeutet der Fehlercode?

    The four-wheel drive control module (DEM) checks how the oil pressure pump performs by comparing its current with predefined limits. The code is stored when the supply wire has a break, which shows up as an open circuit. The cause may be a damaged connector, a break or short to ground in the wire, internal leakage in the pump, or a damaged pump. The four-wheel drive is disengaged while the fault is present.

    Mögliche Ursachen

    • Damaged connector between the oil pressure pump and the four-wheel drive control module (DEM)
    • Break or short to ground in the wire
    • Internal leakage in the oil pressure pump
    • Damaged oil pressure pump

    Was Sie tun können

    1. 1Read and erase the code, then road test to see whether it returns
    2. 2Check the connector between the pump and the control module for damage, loose contact and oxidation
    3. 3Check the wire to the pump for breaks, damage and chafing, and that it does not touch the body
    4. 4If the code returns, have a workshop with diagnostic equipment check the pump, replace it if needed and calibrate the control module

    Symptome, die Sie bemerken können2

    • Four-wheel drive and all-wheel drive do not work
    • Warning symbol and message in the display

    Was der Fehler beeinflussen kann1

    • The four-wheel drive is disengaged while the fault is present

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.