VOLVO
DEM-P188918 - Oil Pressure Pump Performance. General Electrical Failures. Circuit current below threshold
System
Allradantrieb (DEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2009–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2009–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2009–2015
- Volvo XC90 (2003–)2009–2010Nur Motor: B6324S, B8444S · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2012Nur Motor: B6324S5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2013–2014Nur Motor: B6324S5, D5244T18 · Nur Getriebe: TF-80SC AWD
Was bedeutet der Fehlercode?
The oil pressure pump for the four-wheel drive draws too little current, which the four-wheel drive control module (DEM) detects when it compares the pump signal with its limits. The current through the pump depends on the oil temperature, but the code is only set when the low value returns over several drives in a row. The fault can therefore be permanent or intermittent.
Mögliche Ursachen
- Damaged connector between the oil pressure pump and the control module
- Oil level too low in the coupling
- The power supply cable is shorted to ground
- Damaged oil pressure pump
- Damaged safety or overflow valve
Was Sie tun können
- 1Read off the fault code, note it and clear it. Test drive the vehicle to see if the fault returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Check the connector between the pump and the control module for oxidation and loose fit, and follow the wiring for chafing
- 4If you have a diagnostic tool, read the pump signal in live data with the engine running and check whether the value stays steady or jumps
- 5Have a workshop check the oil level in the coupling and look for leaks
- 6If the fault returns, have a workshop check the pump and the safety valve
Symptome, die Sie bemerken können2
- Four-wheel drive does not work
- Warning symbol and text message in the display
Was der Fehler beeinflussen kann1
- Four-wheel drive is disengaged for as long as the fault is present
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.