VOLVO
DEM-U000188 - High Speed CAN Communication Bus. Bus Signal / Message Failures. Bus off
System
Allradantrieb (DEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The four-wheel drive control module (DEM) has switched off its communication on the CAN network, a state known as bus off. It happens when another control module on the network disturbs communication, or when the DEM's own messages cause disturbance. The module then loses contact with the network, and four-wheel drive works with reduced function.
Mögliche Ursachen
- Short circuit between the CAN wires
- Open circuit in one of the CAN wires
- Internal fault in another control module on the same part of the CAN network
- Internal fault in the control module
Was Sie tun können
- 1Read off the fault codes, note them and clear them. Test drive the vehicle to see if the fault returns
- 2Check that the fuses are intact and that the battery is in good condition
- 3Follow the CAN wiring between the control modules for chafing, pinched areas and loose connectors, and check that the connectors are firmly seated and free from oxidation
- 4If you have a diagnostic tool, check which control modules respond on the CAN network and note whether any are missing
- 5If the fault keeps returning, have a workshop measure the CAN network and locate the control module that is disturbing communication
Symptome, die Sie bemerken können1
- Four-wheel drive does not work
Was der Fehler beeinflussen kann2
- Four-wheel drive works with reduced function
- The control module switches itself off and stays off until the power supply to it has been broken
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.