DEM-U014000 - Lost Communication With Central electronic module. General Failure Information. No sub type information
System
Allradantrieb (DEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2009–2010Nur Motor: B6324S, B8444S · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2012Nur Motor: B6324S5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2013–2014Nur Motor: B6324S5, D5244T18 · Nur Getriebe: TF-80SC AWD
Was bedeutet der Fehlercode?
The four-wheel drive control module (DEM) continuously receives the information it needs from the central electronic module (CEM) over CAN communication, including the ignition position and whether reverse gear is engaged. If communication with the central electronic module is lost, the code is set. The fault may lie in the central electronic module, in the communication cable, or in the connections.
Mögliche Ursachen
- Open circuit in the communication cable
- Communication cable shorted to ground
- Communication cable shorted to voltage
- Contact resistance or oxidation in the connections
- Damaged central electronic module (CEM)
Was Sie tun können
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Test drive the vehicle to see if the fault returns and whether four-wheel drive works
- 3If you have a diagnostic tool, read the fault codes in the central electronic module first and remedy them before clearing this code
- 4Check the connectors on the communication cable for oxidation and loose fit, and follow the cable for chafing and pinched areas
- 5Use a multimeter to confirm the communication cable has no contact with ground or voltage
- 6If the fault remains, have a workshop investigate the CAN network and the central electronic module before any part is replaced
Symptome, die Sie bemerken können1
- Four-wheel drive does not work
Was der Fehler beeinflussen kann2
- Four-wheel drive is disengaged
- Four-wheel drive has reduced function
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.