DEM-U03004A - Internal Control Module Software Incompatibility. System Internal Failures. Incorrect component installed
System
Allradantrieb (DEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2009–2010Nur Motor: B6324S, B8444S · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2012Nur Motor: B6324S5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2013–2014Nur Motor: B6324S5, D5244T18 · Nur Getriebe: TF-80SC AWD
Was bedeutet der Fehlercode?
The four-wheel drive control module (DEM) checks that the configuration in the connector to the four-wheel drive unit (AOC) is correct. A module from another car make with a similar four-wheel drive system can be fitted to a Volvo by mistake, and then the DEM does not recognize the configuration. The code is set when the DEM finds that the part does not suit the vehicle.
Mögliche Ursachen
- A control module from another car make fitted by mistake
- Wrong hardware version of the four-wheel drive control module (DEM) for the software
Was Sie tun können
- 1Read off the fault code, note it and clear it. Test drive the vehicle to see if the fault returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3If you have a diagnostic tool, read the hardware version of the control module and note it for the workshop
- 4If the control module has recently been replaced, tell the workshop, since a wrongly fitted module can cause this fault
- 5If the fault remains, have a workshop check that the correct control module is fitted for the vehicle and replace it if necessary
Symptome, die Sie bemerken können2
- Four-wheel drive does not work
- Warning symbol and text message in the display
Was der Fehler beeinflussen kann1
- Four-wheel drive is disengaged
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.