VOLVO
DEM-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Allradantrieb (DEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The all-wheel drive control module (DEM) has not received the vehicle configuration it expects from the central electronic module (CEM), so the initial configuration has not been completed. The code is set when the information is missing after the ignition has been switched on. It is most often a communication fault on the car's data network.
Mögliche Ursachen
- Open circuit in the car's data network (CAN)
- Fault in the central electronic module (CEM)
Was Sie tun können
- 1Read the codes in the central electronic module and other control modules, as they are often linked
- 2Check that the battery and its terminals are in good condition, since voltage drops can disturb the data network
- 3With diagnostic equipment check the data network and the connectors between the modules
- 4Do not replace the central electronic module until a workshop has investigated the data network and confirmed an internal fault
Symptome, die Sie bemerken können1
- No clear symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.