VOLVO
DEM-U210100 - Control Module Configuration Incompatible. General Failure Information. No sub type information
System
Allradantrieb (DEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The four-wheel drive control module (DEM) compares its own configuration with the vehicle configuration reported by the central electronic module (CEM). If the configurations do not agree, the code is set. The fault may lie in the central electronic module or in the software that has been downloaded to the four-wheel drive control module.
Mögliche Ursachen
- Incorrect vehicle configuration data in the central electronic module (CEM)
- Incorrect software downloaded to the four-wheel drive control module (DEM)
Was Sie tun können
- 1Read off the fault codes, note them and clear them. Test drive the vehicle to see if the code returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3If you have a diagnostic tool, read the vehicle configuration and note it for the workshop
- 4If the control module or the central electronic module has recently been replaced, tell the workshop, since a control module from another vehicle causes this code
- 5If the fault remains, have a workshop load new software into the control module and, if needed, the central electronic module, then check the fault codes
Symptome, die Sie bemerken können2
- Four-wheel drive does not work
- Warning symbol and text message in the display
Was der Fehler beeinflussen kann1
- Four-wheel drive is disengaged
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.