Was bedeutet der Fehlercode DIM-000D?

Diagnose und Fehlercodedefinition für DIM-000D (Volvo C70 Cabriolet (1998–2005), Volvo C70 Coupé (1998–2002), Volvo S70 (1997–2000)). Steuergerätereparatur bei OBD Tuning.

VOLVO

DIM-000D - Communication engine control module (ECM). Faulty signal. Intermittent fault

System

Kombiinstrument (DIM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), V70 (1997–2000), V70 XC (1998–2000)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The instrument panel has at some point recorded a communication fault with the engine control module. The code is set when a fault in the engine control module software is detected. The fault is intermittent, and there are no noticeable symptoms for the driver. The fault lies in the engine control module software, not in the instrument.

Mögliche Ursachen

Fault in the engine control module software

Was Sie tun können

1Read off the fault codes in the engine control module and note them for the workshop
2Has the engine control module software been changed, for example by an optimisation? Tell the workshop, so it knows before anything is overwritten
3If you have a diagnostic tool, check that the engine control module responds to diagnostic commands
4If the software has been damaged unintentionally, have a workshop reload it. Clear the code only after this has been done

Symptome, die Sie bemerken können1

No noticeable symptoms for the driver

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.