Was bedeutet der Fehlercode DIM-000E?

Diagnose und Fehlercodedefinition für DIM-000E (Volvo C70 Cabriolet (1998–2005), Volvo C70 Coupé (1998–2002), Volvo S70 (1997–2000)). Steuergerätereparatur bei OBD Tuning.

VOLVO

DIM-000E - Control module. Internal fault. Intermittent fault

System

Kombiinstrument (DIM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), V70 (1997–2000), V70 XC (1998–2000)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The instrument panel control module has at some point registered a fault in its own memory, and the code is therefore set. The fault is intermittent, meaning it has occurred before but does not always show. It may cause some functions to work incorrectly or not at all, but it does not have to.

Mögliche Ursachen

Fault in the control module memory

Was Sie tun können

1Read off the fault code, note it and clear it. Switch the ignition off and on to see if the fault returns
2Note which functions are not working correctly and tell the workshop
3Check that the battery is in good condition and that the fuses are intact, since voltage irregularities can cause memory faults in control modules
4If you have a diagnostic tool, check that the control module responds to diagnostic commands
5If the fault returns, have a workshop check the control module and replace it if needed

Symptome, die Sie bemerken können1

Some functions work incorrectly or not at all

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.