Was bedeutet der Fehlercode DIM-B115C71?

Diagnose und Fehlercodedefinition für DIM-B115C71 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

DIM-B115C71 - Transfer fuel pump. Mechanical Failures. Actuator stuck

System

Kombiinstrument (DIM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

9 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (9)

Was bedeutet der Fehlercode?

Although the code is named for a transfer fuel pump, it concerns the fuel level sensor in the tank. The instrument has noticed that the fuel gauge level does not change during a longer drive, and the code is then set. The cause is that the sensor has jammed, and the gauge may then show a value that is too high or too low.

Mögliche Ursachen

Fuel level sensor has jammed

Was Sie tun können

1Read off the fault code, note it and clear it. Test drive the vehicle to see if the fault returns
2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
3If you have a diagnostic tool, read the fuel level in live data and check whether the value changes when you refuel
4If the fault remains, have a workshop check the fuel level sensor in the tank

Symptome, die Sie bemerken können2

Fuel gauge shows a value that is too high
Fuel gauge shows a value that is too low

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.