VOLVO
DIM-C200262 - Odometer tampered. Algorithm Based Failures. Signal compare failure
System
Kombiinstrument (DIM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The instrument panel module (DIM) works out the total distance from signals sent by several other modules in the vehicle. If one of the signals is marked as invalid, the code is set. The odometer reading may then be incorrect, and the cause should be investigated before anything is changed.
Mögliche Ursachen
- Internal fault in another control module on the same part of the CAN network
- No CAN communication
Was Sie tun können
- 1Switch the ignition off and on, then read the fault code again so that a new test runs
- 2Read off the fault codes in the other control modules. If there are internal memory faults there, remedy them first and follow those fault-finding steps
- 3Check the connectors to the central electronic module and the door modules for oxidation and loose fit
- 4Clear the fault code and try reading it again, to see whether it returns
- 5If the fault remains, have a workshop establish the cause, as this may require replacing the instrument panel
Symptome, die Sie bemerken können1
- Gauges and trip odometer show faults or do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.