VOLVO
DIM-DF16 - CAN bus L signal. Signal too high. Intermittent fault
System
Kombiinstrument (DIM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo C70 Cabriolet (1998–2005)1999, 2001–2005
- Volvo C70 Cabriolet (1998–2005)2000Alle Motoren außer: B5244S, B5244T · Nur Getriebe: M56
- Volvo C70 Coupé (1998–2002)1999, 2001–2002
- Volvo C70 Coupé (1998–2002)2000Alle Motoren außer: B5244S, B5244T · Nur Getriebe: M56
- Volvo S70 (1997–2000)1999–2000
- Volvo V70 (1997–2000)1999–2000
- Volvo V70 (2000–2008)2000Alle Motoren außer: D5252T MSA 15.8
- Volvo V70 XC (1998–2000)1999–2000
Was bedeutet der Fehlercode?
The instrument cluster (DIM) has detected that the voltage on the CAN-L signal wire, part of the car's data network, has been too high for a period. The fault is intermittent, meaning it has been present before but is not active right now. High voltage on this wire is often caused by the wire briefly shorting to supply voltage.
Mögliche Ursachen
- The CAN-L wire is shorted to supply voltage, often intermittently
- Fault in the instrument cluster
Was Sie tun können
- 1Read the codes in other control modules, since several may be affected by the data network
- 2Check the signal wire between the instrument cluster and the other modules for chafing, pinching and places where it could short to supply voltage
- 3Use diagnostic equipment to check that CAN-L is not shorted to supply and check the connectors at the cluster
- 4Replace the instrument cluster only after the wiring has been investigated and the fault remains
Symptome, die Sie bemerken können1
- Several systems in the car may work poorly or not at all
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.