Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    DIM-E003
    VOLVO

    DIM-E003 - Configuration fault. Faulty configuration

    System

    Kombiinstrument (DIM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo S60 (2001–2009)2001–2009
    • Volvo S80 (1999–2006)1999–2006
    • Volvo V70 (2000–2008)2000–2008
    • Volvo V70 XC / XC70 (2001–2007)2001–2007
    • Volvo XC90 (2003–)2003–2015

    Was bedeutet der Fehlercode?

    The instrument checks its own configuration ID against the signal setup that the central electronic module (CEM) transmits on the CAN network. If the IDs do not match, or if communication with the CEM has been interrupted, the code is set. The instrument then responds to diagnostic commands but does not work normally on the network. A wrong ID can mean the part is not intended for this particular vehicle.

    Mögliche Ursachen

    • Incorrect configuration ID, because the instrument is not intended for the vehicle, for example a used part with other software or hardware
    • Open circuit in the CAN wiring between the instrument and the central electronic module (CEM)

    Was Sie tun können

    1. 1Read off the fault codes, note them and clear them. Test drive the vehicle to see if the fault returns
    2. 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    3. 3Follow the CAN wiring between the instrument and the central electronic module for chafing, pinched areas and loose connectors
    4. 4Tell the workshop if the instrument has recently been replaced, since a used part with the wrong software can cause this fault
    5. 5If the fault remains, have a workshop check the configuration and load the correct software into the instrument if needed

    Symptome, die Sie bemerken können3

    • No gauges work
    • The instrument lighting does not work
    • The instrument does not function when CAN communication is missing

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    Häufige Fehlerkombinationen

    DIM-0001
    DIM-0002
    DIM-E003

    DIM-0001, DIM-0002, DIM-E003 Volvo DIM – Kombiinstrument Processoravbrott

    VOLVO • 198 Analysen

    DIM-E003
    DIM-0005
    DIM-0006

    DIM-E003, DIM-0005, DIM-0006 Volvo XC90 / S80 P2 – DIM Kombiinstrument Nätverkskrasch

    VOLVO • 138 Analysen

    SRS-00D4
    SRS-00D5
    DIM-E003

    SRS-00D4, SRS-00D5, DIM-E003 Volvo V70 / S60 / XC90 P2 – DIM Kombiinstrument SRS-Lampa Signalbortfall

    VOLVO • 85 Analysen

    Alle Diagnosekombinationen ansehen
    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.