Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    DIM-U000188
    VOLVO

    DIM-U000188 - High Speed CAN Communication Bus. Bus Signal / Message Failures. Bus off

    System

    Kombiinstrument (DIM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    9 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (10)
    • Volvo S60 (2011–)2014–2015
    • Volvo S80 (2007–)2014–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2013Nur Motor: D82PHEV
    • Volvo V60 (2011–)2014–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2014–2015
    • Volvo XC60 (2009–)2014–2015
    • Volvo XC70 (2008–)2014–2015

    Was bedeutet der Fehlercode?

    The instrument has switched off its communication on the high-speed CAN network (HS-CAN), a state known as bus off. It happens when another control module disturbs the network, or when the instrument's own messages cause disturbance. The instrument lighting and dimmer then do not work.

    Mögliche Ursachen

    • Short circuit between the CAN wires
    • Open circuit in one of the CAN wires
    • Disturbance from another control module on the same part of the network
    • Damaged instrument panel module (DIM)

    Was Sie tun können

    1. 1Read off the fault codes, note them and clear them. Test drive the vehicle to see if the fault returns
    2. 2Check that the fuses are intact and that the battery is in good condition
    3. 3Follow the CAN wiring for chafing and pinched areas, and check that the connectors are firmly seated and free from oxidation
    4. 4If you have a diagnostic tool, read which control modules respond on the CAN network and note whether any are missing
    5. 5If the fault returns, have a workshop carry out a CAN fault-finding procedure, as it requires measurements in the wiring

    Symptome, die Sie bemerken können1

    • The instrument lighting and dimmer do not work

    Was der Fehler beeinflussen kann1

    • The instrument switches itself off and stays off until the power supply to it has been broken

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.