Was bedeutet der Fehlercode DIM-U001000?

Diagnose und Fehlercodedefinition für DIM-U001000 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

DIM-U001000 - Medium Speed CAN Communication Bus. General Failure Information. No sub type information

System

Kombiinstrument (DIM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

6 Modelle

S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (7)

Was bedeutet der Fehlercode?

The instrument communicates on the medium-speed CAN network (MS-CAN), one of the vehicle's CAN networks. The code is set when communication is disturbed by another control module on the network, or by the instrument's own messages. The instrument may then switch off or stop working.

Mögliche Ursachen

Short circuit between the CAN wires
Open circuit in one of the CAN wires
Internal fault in another control module on the same part of the CAN network
Damaged instrument panel module (DIM)

Was Sie tun können

1Read off the fault codes, note them and clear them. Test drive the vehicle to see if the fault returns
2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
3Follow the CAN wiring between the instrument and the other control modules for chafing and pinched areas
4If you have a diagnostic tool, read which control modules respond on the network and note whether any are missing
5If the fault remains, have a workshop measure the MS-CAN network and locate the control module that disturbs communication

Symptome, die Sie bemerken können1

The combined instrument panel does not function

Was der Fehler beeinflussen kann1

The instrument shuts down and remains inactive until its power is cut and reconnected

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.