VOLVO
DIM-U010100 - Lost communication with Transmission Control Module (TCM). General Failure Information. No sub type information
System
Kombiinstrument (DIM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (10)
Was bedeutet der Fehlercode?
The instrument cluster (DIM) gets no reply from the transmission control module (TCM) and has lost contact with it, either because the module has stopped working or because the communication is broken. The fault is general and does not point to a specific fault type.
Mögliche Ursachen
- The transmission control module (TCM) is not working
- Break in the communication wire between the modules
- The communication wire is shorted to earth
- The communication wire is shorted to supply voltage
- Poor contact, oxidation or breaks in the connections
Was Sie tun können
- 1Read and note the fault codes in the instrument cluster and in the transmission control module, clear them and road test the car
- 2Check the fuses for the instrument cluster and the transmission control module in the fuse box
- 3Check the wiring to the transmission control module for chafing and pinch damage, and that the connectors are fully engaged
- 4If any work has recently been done on the gearbox or the electrical system, check that all connectors are properly reconnected
- 5If the fault returns, have a workshop with diagnostic equipment check the CAN network and the transmission control module
Symptome, die Sie bemerken können1
- The gear indicator in the instrument cluster does not appear
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.