Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-0009
    VOLVO

    ECM-0009 - Charging pressure sensor. Power supply too high. Intermittent fault.

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)

    Modelle nach Baujahr und Motor anzeigen (4)
    • Volvo S70 (1997–2000)1999–2000Nur Motor: D5252T MSA 15.8
    • Volvo S80 (1999–2006)1999–2001Nur Motor: D5252T MSA 15.8
    • Volvo V70 (1997–2000)1999–2000Nur Motor: D5252T MSA 15.8
    • Volvo V70 (2000–2008)2000–2001Nur Motor: D5252T MSA 15.8

    Was bedeutet der Fehlercode?

    The boost pressure sensor receives too high a supply voltage. The fault is intermittent, meaning it comes and goes, and may not be present right now. While the code is active, the engine control module limits boost pressure to the basic level, so the engine feels sluggish and exhaust gas recirculation does not work as it should.

    Mögliche Ursachen

    • The supply wire is shorted to battery voltage
    • Contact resistance in the connections
    • Faulty boost pressure sensor

    Was Sie tun können

    1. 1Check the wires and connectors to the boost pressure sensor for chafing, pinch damage and corrosion
    2. 2Measure with a multimeter that the supply wire to the sensor is not shorted to battery voltage with the ignition on
    3. 3Because the fault is intermittent, note when the engine feels sluggish, and whether this happens under certain loads
    4. 4If the engine feels sluggish, avoid heavy loads until the fault has been repaired
    5. 5Clear the fault code and road test the car. If it returns, have a workshop with diagnostic equipment check the boost pressure sensor and the engine control module

    Symptome, die Sie bemerken können2

    • Poor acceleration and a sluggish engine
    • Exhaust gas recirculation (EGR) does not work

    Was der Fehler beeinflussen kann2

    • Exhaust gas recirculation (EGR) is switched off
    • Boost pressure is limited to the basic level

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.