Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-0016
    VOLVO

    ECM-0016 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    4 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
    • Volvo C70 (2006–2013)2008Nur Motor: D4204T
    • Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
    • Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
    • Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6

    Was bedeutet der Fehlercode?

    The engine control module compares the speed calculated from the crankshaft pulse sensor with the speed calculated from the camshaft sensor. If the two do not agree, the code is set. The fault shows up as the engine starting unreliably or stalling, which can happen while the engine is running.

    Mögliche Ursachen

    • Contact resistance or oxidation in the connectors
    • Break in the signal wire
    • Faulty camshaft sensor
    • Faulty crankshaft pulse sensor

    Was Sie tun können

    1. 1Check the connectors to the camshaft sensor and the crankshaft pulse sensor for contact resistance and oxidation. Clean them and make sure they are fully seated
    2. 2Measure with a multimeter that the signal wires to the sensors have no break
    3. 3Check that the fuses are intact. Their location is in the owner's manual or the fuse list
    4. 4If you have a diagnostic tool, compare the engine speed with the camshaft speed in live data with the engine at idle. The values should agree
    5. 5Clear the fault code and road test the car. If it returns, have a workshop investigate the camshaft sensor and the crankshaft pulse sensor

    Symptome, die Sie bemerken können2

    • The engine does not start or starts unreliably
    • The engine may stall intermittently

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.