Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-002C
    VOLVO

    ECM-002C - Fuel quantity. Wrong quantity when stopped. Intermittent fault.

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    3 Modelle

    S70 (1997–2000), S80 (1999–2006), V70 (1997–2000)

    Modelle nach Baujahr und Motor anzeigen (3)
    • Volvo S70 (1997–2000)1999–2000Nur Motor: D5252T MSA 15.8
    • Volvo S80 (1999–2006)1999–2001Nur Motor: D5252T MSA 15.8
    • Volvo V70 (1997–2000)1999–2000Nur Motor: D5252T MSA 15.8

    Was bedeutet der Fehlercode?

    The fuel quantity does not match when the car is stationary. At ignition-on the positions of the fuel quantity regulator are checked, and if the position sensor's signal differs too much from what is expected, the code is set. The fault is intermittent, meaning it comes and goes, and may not be present right now. The engine may then stall or fail to start.

    Mögliche Ursachen

    • The regulator's signal wire is shorted to earth or battery voltage
    • Break in the signal or supply wire to the fuel quantity regulator
    • Faulty injection pump
    • Break in the wiring to the regulator's position sensor
    • The wires to the position sensor are shorted to earth

    Was Sie tun können

    1. 1Check the wiring between the injection pump and the fuel quantity regulator for intermittent breaks
    2. 2Check the connectors to the engine control module and the injection pump for play and oxidation. Clean them and make sure they are fully seated
    3. 3Because the fault is intermittent, note whether the engine stalls when the car is stationary or after a while of driving
    4. 4Clear the fault code and road test. If it returns, have a workshop investigate the fuel quantity regulator and the injection pump
    5. 5The injection pump is a workshop task, since the fuel system is under high pressure

    Symptome, die Sie bemerken können2

    • The engine stalls
    • The engine does not start

    Was der Fehler beeinflussen kann1

    • Only basic boost pressure is allowed

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.