ECM-0088
VOLVO
ECM-0088 - Fuel pressure control valve. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007Nur Motor: D4204T
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Nur Motor: D4204T
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Nur Motor: D4204T
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
Was bedeutet der Fehlercode?
The engine control module monitors the fuel pressure control valve and has registered that the signal to it is too low. The cause is most often poor contact or a break in the wiring, but the valve itself may also be damaged.
Mögliche Ursachen
- Loose connections, contact resistance or oxidation at the terminals
- Break in the power supply
- Break in the signal wire
- Signal wire shorted to ground
- Damaged fuel pressure control valve
Was Sie tun können
- 1With the ignition off, check the connector to the fuel pressure control valve for looseness, contact resistance and oxidation
- 2Use a multimeter to check that the signal wire to the valve does not break when the harness is moved and has no contact with ground
- 3The fuel system operates at very high pressure and can cause injury, so have a workshop carry out all work on the lines and the valve
- 4If the fault returns after erasing codes and a test drive, have a workshop replace the fuel pressure control valve
Symptome, die Sie bemerken können2
- Car feels weak or performs poorly
- Warning symbol and text message in the display
Was der Fehler beeinflussen kann1
- Engine speed (RPM) may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.