VOLVO
ECM-0134 - Front heated oxygen sensor (HO2S), bank 1. Signal missing
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (3)
Was bedeutet der Fehlercode?
The engine control module has registered that the signal from the front lambda sensor on bank 1 is missing and treats this as a fault. Without the signal the control module cannot read the exhaust, so it cannot track the fuel-air mixture. The usual cause is an open or shorted signal wire, or a damaged sensor.
Mögliche Ursachen
- Open circuit in the signal wire
- Signal wire shorted to ground
- Signal wire shorted to supply voltage
- Signal wire shorted to reference voltage
- Damaged front lambda sensor
- Damaged control module
Was Sie tun können
- 1Read, note and clear the code, then road test to see whether it returns
- 2Check that the connector at the lambda sensor is fully engaged and free from corrosion
- 3Follow the signal wire from the sensor and look for breaks, chafing and pinched sections, especially near the exhaust pipe
- 4With the sensor connector unplugged, use a multimeter to check that the signal wire has no connection to ground (the body)
- 5If you have a diagnostic tool, check in live data whether the lambda sensor value changes while the engine runs. A value that never changes points to a missing signal
- 6If the fault returns, have a workshop with diagnostic equipment check the control module and the sensor
Symptome, die Sie bemerken können1
- Malfunction indicator lamp (MIL) lit
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.