VOLVO
ECM-0222 - Accelerator pedal (AP) position sensor. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4204T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: D4204T
- Volvo V50 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4204T
Was bedeutet der Fehlercode?
The engine control module has received a message from the central electronic module (CEM) saying that the analog accelerator pedal signal is too low. The signal travels over the CAN network, so the fault lies in the CEM rather than the engine control module. The code cannot be cleared until the CEM fault has been remedied.
Mögliche Ursachen
- Fault in the central electronic module (CEM), which must be traced first
Was Sie tun können
- 1Read the fault codes in the central electronic module (CEM) first, since this code comes from there
- 2Trace and fix the faults in the CEM, with help from a workshop if needed
- 3Then clear the code in the engine control module and road test to see whether it returns
- 4Check that the connector at the accelerator pedal sensor is fully engaged and free from oxidation
- 5If the fault returns, have a workshop with diagnostic equipment check the CEM and the accelerator pedal sensor wiring
Symptome, die Sie bemerken können1
- Text message and warning symbol in the display
Was der Fehler beeinflussen kann1
- If the PWM signal from the accelerator pedal sensor works, it is used instead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.