ECM-0237
VOLVO
ECM-0237 - Boost pressure sensor (MAP). Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007Nur Motor: D4204T
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Nur Motor: D4204T
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Nur Motor: D4204T
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
Was bedeutet der Fehlercode?
The engine control module monitors the boost pressure sensor signal and compares boost pressure with the atmospheric pressure that it measures itself. The code is set when the signal is too low, or when the two pressures differ clearly with the ignition on. The cause is a signal wire shorted to ground or a damaged boost pressure sensor.
Mögliche Ursachen
- Signal wire shorted to ground
- Damaged boost pressure sensor
Was Sie tun können
- 1Read the fault code, clear it and road test to see whether it returns
- 2Check the boost pressure sensor connector for looseness, contact resistance and oxidation
- 3With the engine off, compare boost and atmospheric pressure in live data. If they roughly agree, the connector is probably the fault
- 4With the connector unplugged, use a multimeter to check that the signal wire has no connection to ground (the body)
- 5If the fault returns after a road test, have a workshop decide whether the boost pressure sensor should be replaced
Symptome, die Sie bemerken können1
- Check engine light comes on or behaves abnormally
Was der Fehler beeinflussen kann1
- A calculated boost pressure is used instead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.