VOLVO
ECM-02E2 - Diesel Intake Air Flow Control Circuit Low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
Was bedeutet der Fehlercode?
On the diesel engine, the engine control module checks the voltage signal from the control valve in the air intake inlet and logs a fault when the signal is too low. The cause may be poor contact, a break or a short to ground in the signal wire, or a damaged control valve.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- Open circuit in the signal wire
- Signal wire shorted to ground
- Damaged control valve at the air intake inlet
Was Sie tun können
- 1Check that the relevant fuses are intact
- 2Check the connector at the intake air control valve: is it fully engaged and free from oxidation?
- 3Follow the signal wire to the control valve and look for breaks, chafing and pinched sections
- 4With the connector unplugged, use a multimeter to check that the signal wire has no connection to ground (the body)
- 5If you have a diagnostic tool, read the control valve signal in live data with the engine running and see whether the value follows when the valve is activated
- 6If the fault remains, have a workshop decide whether the control valve should be replaced
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.