VOLVO
ECM-02E8 - Diesel Intake Air Flow Position Sensor Circuit Low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
Was bedeutet der Fehlercode?
On the diesel engine, the engine control module registers that the signal from the position sensor for the air intake control valve is too low. The causes are oxidized or poor connectors, a wire shorted to ground, or a damaged control valve.
Mögliche Ursachen
- Contact resistance or oxidation in the connectors
- Wire shorted to ground
- Damaged control valve at the air intake inlet
Was Sie tun können
- 1Check that the fuses for the control valve are intact
- 2Check the connectors at the control valve and the control module: they should be fully engaged and free from oxidation
- 3With the connector unplugged, use a multimeter to check that the wire has no connection to ground (the body)
- 4If you have a diagnostic tool, activate the control valve and see whether the position sensor value follows in live data
- 5If the fault remains, have a workshop decide whether the control valve should be replaced
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.