Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-0405
    VOLVO

    ECM-0405 - Position sensor (exhaust gas recirculation (EGR)). Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (10)
    • Volvo C30 (2007–2013)2007Nur Motor: D4204T
    • Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
    • Volvo C70 (2006–2013)2008Nur Motor: D4204T
    • Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
    • Volvo S40 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
    • Volvo S40 (2004–2013)2007Nur Motor: D4204T
    • Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
    • Volvo V50 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
    • Volvo V50 (2004–2013)2007Nur Motor: D4204T
    • Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6

    Was bedeutet der Fehlercode?

    The control module monitors the EGR valve function, and the position sensor in the valve should report a position that matches the control. If the signal from the position sensor is too low, the fault is set. The causes are a signal wire shorted to ground or a damaged EGR valve.

    Mögliche Ursachen

    • Signal wire short-circuited to ground
    • Damaged EGR valve

    Was Sie tun können

    1. 1Switch off the ignition and check the connections between the control module and the EGR valve for contact resistance and oxidation
    2. 2Use a multimeter to check that the signal wire from the position sensor is not shorted to ground
    3. 3Look for chafed wires near the EGR valve, where the cable may have been pressed against an earthed metal part
    4. 4If you have a diagnostic tool, read the EGR valve position in live data with the engine running and see whether the value changes when the valve is controlled
    5. 5If the fault remains, have a workshop with diagnostic equipment check the EGR valve and its position sensor

    Symptome, die Sie bemerken können1

    • The check engine lamp lights or behaves abnormally

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.