VOLVO
ECM-0573 - Brake pedal position sensor. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (3)
Was bedeutet der Fehlercode?
The engine control module monitors the brake pedal position sensor and sets the fault when it registers a fault in the sensor. The fault can only be detected after at least one heavy braking. The cause is a signal wire shorted to voltage.
Mögliche Ursachen
- Signal wire short-circuited to voltage
Was Sie tun können
- 1First read the fault codes in the brake control module (BCM). This code cannot be erased until they are dealt with
- 2Use a multimeter to check that the signal wire from the brake pedal sensor is not shorted to voltage
- 3Look for wires at the brake pedal that may have rubbed against a live part
- 4The brake system is a safety function: have a workshop check the brake pedal sensor and the brake control module if the fault remains
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.