VOLVO
ECM-060A - Engine control module (ECM). Internal fault
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (17)
- Volvo C30 (2007–2013)2007–2009Nur Motor: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo C30 (2007–2013)2010Nur Motor: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo C30 (2007–2013)2011–2012Nur Motor: B4164S3, B4204S3, B4204S4
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2004Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2005Nur Motor: B4164S3, B4184S11, D4204T, D4204T2
- Volvo S40 (2004–2013)2006Nur Motor: B4164S3, B4184S11, B4184S8, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2009Nur Motor: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo S40 (2004–2013)2010Nur Motor: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4164S3, B4204S3, B4204S4
- Volvo V50 (2004–2013)2004Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2005Nur Motor: B4164S3, B4184S11, D4204T, D4204T2
- Volvo V50 (2004–2013)2006Nur Motor: B4164S3, B4184S11, B4184S8, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2009Nur Motor: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo V50 (2004–2013)2010Nur Motor: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4164S3, B4204S3, B4204S4
Was bedeutet der Fehlercode?
The engine control module (ECM) has two internal processors that compare the input signals for vehicle speed, accelerator pedal position and brake pedal position. If those signals differ, the code is set, and the fault may then lie in the control module or in one of the signals. A failed software download can also cause the code. Engine torque and speed are limited while the fault remains.
Mögliche Ursachen
- Input signals for vehicle speed, accelerator pedal or brake pedal do not agree
- Failed or incomplete software download to the engine control module
- Damaged engine control module (ECM)
Was Sie tun können
- 1Check that the accelerator and brake pedals move freely and are not held back by a mat or object
- 2Check the battery condition and that the terminals are tight, since voltage disturbances can cause faults in the engine control module
- 3If you have a diagnostic tool, watch vehicle speed, accelerator position and brake pedal position in live data while driving; the values should match how the car is moving
- 4Have a workshop check that the engine control module has the latest software and reload it if the earlier download failed
- 5If the fault remains after these checks, the engine control module is probably damaged and a workshop should replace it
Symptome, die Sie bemerken können3
- Text message and warning symbol in the display
- Poor performance or the car lacks power
- Malfunction indicator lamp lit or behaving abnormally
Was der Fehler beeinflussen kann2
- Engine torque is limited
- Engine speed is limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.