VOLVO
ECM-0617 - Starter motor relay. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo C30 (2007–2013)2007–2010Nur Motor: B4164S3, D4204T
- Volvo C30 (2007–2013)2011–2012Nur Motor: B4164S3
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2004Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2005–2006Nur Motor: B4164S3, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: B4164S3, D4204T
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4164S3
- Volvo V50 (2004–2013)2004Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2005–2006Nur Motor: B4164S3, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: B4164S3, D4204T
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4164S3
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the signal wire to the starter motor relay. If it sees the signal running too high, the code is set. The fault usually shows up when starting: the engine does not start, does not turn over, or there is no click when you try to start it.
Mögliche Ursachen
- Signal wire short-circuited to battery voltage
- Damaged starter motor relay
- Signal wire short-circuited to another supply voltage
Was Sie tun können
- 1Check the fuses for the starter circuit in the engine bay fuse box, and check that the battery is in good condition
- 2Check that the battery terminals are tight and that the wiring from the starter motor relay is not chafed
- 3With the ignition off, use a multimeter to check that the signal wire to the starter motor relay is not in contact with battery voltage, for example through chafed wiring
- 4If the wiring is intact and the fault remains, the starter motor relay is probably damaged; have a workshop replace it
Symptome, die Sie bemerken können3
- The engine does not start
- The engine does not turn over when starting
- No relay click when you try to start
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.