VOLVO
ECM-061E - Internal Control Module Brake Signal Performance
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007Nur Motor: D4204T
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Nur Motor: D4204T
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Nur Motor: D4204T
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
Was bedeutet der Fehlercode?
The control modules send and receive information continuously over the car's CAN network. Although the code is named brake signal, the fault concerns communication: serious interference on the high-speed side of the CAN network, or disturbed or absent communication with the brake control module (BCM), sets the code. Cruise control cannot be engaged while the fault is active.
Mögliche Ursachen
- Loose connection, contact resistance or oxidation at the terminals
- Break in one of the CAN wires or a short between them
- A fault in another module sharing the same part of the CAN network
- The fault may originate in the brake control module (BCM)
Was Sie tun können
- 1Check that the relevant fuses are intact
- 2Try the cruise control with the switches on the steering wheel during a road test and see whether it can be engaged
- 3Check the connectors at the engine control module and the brake control module (BCM) for looseness, contact resistance and oxidation
- 4If you have a diagnostic tool, read out the fault codes in the brake control module (BCM) and remedy them first, since communication with it is disturbed
- 5If the fault remains after these checks, have a workshop read the CAN communication and reload the engine control module software if needed
Symptome, die Sie bemerken können1
- Cruise control cannot be engaged
Was der Fehler beeinflussen kann1
- Cruise control is switched off while the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.