VOLVO
ECM-0670 - Glow Plug Module Control Circuit
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
Was bedeutet der Fehlercode?
The ECM switches the glow plugs on through a relay that sits in the engine bay relay and fuse box. The relay is fed through a fuse and earthed via the control module. The code is set when the signal in the control circuit is too high, missing or too low. A fault can make a diesel engine harder to start, especially when cold.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- Signal wire open, or shorted to earth or to voltage
- Supply wire to the relay open, or shorted to earth
- Cables to the glow plugs shorted to earth or voltage
- Damaged glow plug relay
Was Sie tun können
- 1Check that the glow plug fuse is intact in the engine bay relay and fuse box
- 2If you have a diagnostic tool, activate the glow plugs and listen for the relay to click in
- 3Check the connectors at the glow plug relay and the control module for contact resistance and oxidation
- 4With the ignition off, use a multimeter to check the relay and glow plug wiring for contact with earth or supply voltage
- 5If the wiring is intact and the fault remains, have a workshop read the system with diagnostic equipment and decide whether the relay needs replacing
Symptome, die Sie bemerken können2
- The engine starts poorly or not at all
- The engine does not turn over at start attempts
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.