VOLVO
ECM-0686 - System relay. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (17)
- Volvo C30 (2007–2013)2007–2009Nur Motor: B4184S11, B4184S8, B4204S3, D4204T
- Volvo C30 (2007–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3, B4204S4
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2004Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2005Nur Motor: B4184S11, D4204T, D4204T2
- Volvo S40 (2004–2013)2006Nur Motor: B4184S11, B4184S8, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2009Nur Motor: B4184S11, B4184S8, B4204S3, D4204T
- Volvo S40 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
- Volvo V50 (2004–2013)2004Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2005Nur Motor: B4184S11, D4204T, D4204T2
- Volvo V50 (2004–2013)2006Nur Motor: B4184S11, B4184S8, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2009Nur Motor: B4184S11, B4184S8, B4204S3, D4204T
- Volvo V50 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
Was bedeutet der Fehlercode?
The ECM watches the system relay. It sets the code when the signal from the relay is too low, or when the relay does not release within the expected time. The fault may show at start attempts, when the engine does not start or turn over and the relay gives no click.
Mögliche Ursachen
- Signal wire shorted to earth
- Signal wire shorted to voltage
- Damaged system relay
Was Sie tun können
- 1Check the battery voltage and condition, and that the battery terminals are tight
- 2Check that the generator is charging the battery
- 3Check the connectors at the engine control module and the system relay for contact resistance and oxidation
- 4With the ignition off, check the signal wire for a short to earth
- 5If no fault is found and the fault remains, a new system relay can be tried; a workshop should fit it
Symptome, die Sie bemerken können2
- Starting problems, with the engine not starting or turning over
- No click from the relay at start attempts
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.