Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-0850
    VOLVO

    ECM-0850 - Park / Neutral Switch Input Circuit

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    3 Modelle

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo C30 (2007–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
    • Volvo C30 (2007–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3, B4204S4
    • Volvo S40 (2004–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
    • Volvo S40 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
    • Volvo V50 (2004–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
    • Volvo V50 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4

    Was bedeutet der Fehlercode?

    The ECM compares the signal from the gear position sensor for positions P and N with the same position sent over CAN by the transmission control module (TCM). If they differ, the code is set, and the ECM then uses the CAN signal instead.

    Mögliche Ursachen

    • Short circuit to earth or supply voltage in the signal wire
    • Open circuit in the signal wire
    • Fault in the transmission control module (TCM), which should be checked first

    Was Sie tun können

    1. 1Check that the fuses are intact in the fuse boxes
    2. 2Check the connectors at the gear position sensor and the transmission control module for looseness, contact resistance and oxidation
    3. 3If you have a diagnostic tool, read the fault codes in the transmission control module and remedy them first
    4. 4With the ignition off, use a multimeter to check the signal wire for an open circuit and for a short to earth or supply voltage
    5. 5If the fault remains, have a workshop decide which part needs replacing

    Symptome, die Sie bemerken können1

    • The starter motor does not turn

    Was der Fehler beeinflussen kann1

    • The ECM uses the signal received over CAN instead

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.