VOLVO
ECM-0A10 - Transformer. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo C30 (2007–2013)2007–2010Nur Motor: D4204T
- Volvo C70 (2006–2013)2008–2010Nur Motor: D4204T
- Volvo S40 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Nur Motor: D4204T
- Volvo V50 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Nur Motor: D4204T
Was bedeutet der Fehlercode?
The ECM has detected an internal fault in the voltage transformer that powers the piezo-electric injectors. The code is set when the fault lies in that part of the control module. The fault may light the check engine lamp.
Mögliche Ursachen
- Damaged engine control module (ECM)
Was Sie tun können
- 1Have a workshop check that the engine control module has the latest software and reload it if needed
- 2Check the battery condition and that the battery terminals are tight, since voltage disturbances can affect the module
- 3If the fault persists after the software check, the engine control module is probably damaged and a workshop should replace it
Symptome, die Sie bemerken können1
- Check engine lamp lit or behaving abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.