ECM-1112
VOLVO
ECM-1112 - Intake air temperature (IAT) sensor inlet. Intermittent fault
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
3 ModelleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (13)
- Volvo C30 (2007–2013)2007–2009Nur Motor: B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3, B4204S4
- Volvo S40 (2004–2013)2005Nur Motor: B4184S11
- Volvo S40 (2004–2013)2006Nur Motor: B4184S11, B4184S8
- Volvo S40 (2004–2013)2007–2009Nur Motor: B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
- Volvo V50 (2004–2013)2005Nur Motor: B4184S11
- Volvo V50 (2004–2013)2006Nur Motor: B4184S11, B4184S8
- Volvo V50 (2004–2013)2007–2009Nur Motor: B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
Was bedeutet der Fehlercode?
During the same operating cycle the engine control module has repeatedly lost the signal from the intake air temperature sensor, more often than allowed. The fault is intermittent, meaning the signal has dropped out and then returned. It is checked while driving and usually goes unnoticed by the driver.
Mögliche Ursachen
- Open circuit or short circuit to ground in the signal wire
- Short circuit to supply voltage in the signal wire
- Damaged intake air temperature sensor
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the intake air temperature sensor connector is secure and free from oxidation and contact resistance
- 3Use a multimeter to check the signal wire for an open circuit and a short circuit to ground
- 4Use a multimeter to check the signal wire for a short circuit to supply voltage
- 5If the fault remains with a clean connector and an intact wire, have a workshop check the sensor
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.