VOLVO
ECM-121C - Mass air flow (MAF) sensor. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Nur Motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The measured air mass from the mass air flow sensor is higher than the value the engine control module has calculated, and the code is set. The fault can lie in the wiring, where the signal wire may be shorted to supply voltage or the ground wire broken, or in the sensor itself.
Mögliche Ursachen
- Signal wire short-circuited to supply voltage
- Open circuit in the ground lead
- Damaged mass air flow sensor
Was Sie tun können
- 1Check the wiring to the mass air flow sensor for chafing and loose connectors
- 2Use a multimeter to check that the signal wire has no contact with supply voltage and that the ground wire is not broken
- 3With your own diagnostic tool, check that the air mass in live data rises smoothly when the throttle is pressed
- 4If the fault remains, have a workshop check the mass air flow sensor and its wiring
Symptome, die Sie bemerken können2
- The malfunction indicator lamp comes on
- The engine runs worse than normal
Was der Fehler beeinflussen kann3
- Boost pressure is calculated instead of measured
- Rear oxygen sensor control is switched off
- Misfire detection is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.