VOLVO
ECM-130F - Cylinder to Crankshaft Reference Synchronization
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3, B4204S4
- Volvo S40 (2004–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
- Volvo V50 (2004–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
Was bedeutet der Fehlercode?
The ECM watches both the camshaft sensor and the flywheel sensor, and needs their signals to know which cylinder is in the right position. The fault is set when the synchronization signal is missing. It can only be detected when the module is able to check the sensors and the conditions for the check are met.
Mögliche Ursachen
- Damaged camshaft sensor
- Damaged flywheel sensor
Was Sie tun können
- 1Read the fault code, clear it and test drive to see whether it returns
- 2Check that the camshaft sensor and flywheel sensor connectors are free from contact resistance and oxidation
- 3Check that the sensors are firmly fitted and that their wiring has no chafing or pinch damage
- 4If you have a diagnostic tool: check in live data that both the camshaft sensor and the flywheel sensor give a signal when the engine runs
- 5If the connectors and wiring are fine: have a workshop check the sensors with diagnostic equipment
Symptome, die Sie bemerken können1
- Engine warning lamp comes on
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.