VOLVO
ECM-1554 - Fuel injection system driver. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007Nur Motor: D4204T
- Volvo C30 (2007–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo C70 (2006–2013)2008Nur Motor: D4204T
- Volvo C70 (2006–2013)2009–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Nur Motor: D4204T
- Volvo S40 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Nur Motor: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Nur Motor: D4204T
- Volvo V50 (2004–2013)2008–2010Nur Motor: D4204T · Nur Getriebe: MMT6, MPS6
Was bedeutet der Fehlercode?
The engine control module (ECM) checks the output stage that drives the fuel injectors and flags a fault when the injection quantity is too large. The last digit of the fault code gives cylinder 4.
Mögliche Ursachen
- Contact resistance, oxidation or poor contact in the connections to the cylinder 4 injector
- Open circuit in the signal wire (+) to cylinder 4
- Open circuit in the signal wire (-) to cylinder 4
- Damaged cylinder 4 injector
Was Sie tun können
- 1Switch off the ignition and check the connector to the cylinder 4 injector for play, contact resistance and oxidation
- 2Look for pinched, chafed or broken wires to cylinder 4, and use a multimeter to check that they have no open circuit
- 3If you have a diagnostic tool: activate the cylinder 4 injector and see whether it responds
- 4Clear the fault code and test drive the car. If it returns once the wiring is intact, have a workshop replace the cylinder 4 injector
Symptome, die Sie bemerken können3
- Check engine light comes on or behaves abnormally
- The engine lacks power
- Warning symbol and a text message in the display
Was der Fehler beeinflussen kann2
- Engine speed is limited
- The car goes into limp home mode
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.