Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-1650
    VOLVO

    ECM-1650 - Power Steering Pressure Switch Out Of Self Test Range

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    3 Modelle

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo C30 (2007–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
    • Volvo C30 (2007–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3, B4204S4
    • Volvo S40 (2004–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
    • Volvo S40 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
    • Volvo V50 (2004–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
    • Volvo V50 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4

    Was bedeutet der Fehlercode?

    The ECM checks the signal from the servo pressure switch, which senses pressure in the power steering system, against its normal range. If the signal is outside that range while the engine runs, fault code ECM-1650 is set. The control module uses the signal to compensate for the torque the power steering takes.

    Mögliche Ursachen

    • Contact resistance, oxidation or poor contact in the connections
    • Open circuit or short to ground in the signal wire
    • Signal wire short-circuited to voltage

    Was Sie tun können

    1. 1On cars with hydraulic power steering: switch off the ignition and check the servo pressure switch connector for play, contact resistance and oxidation
    2. 2With a multimeter, check that the signal wire from the servo pressure switch is not broken or shorted to ground or voltage
    3. 3If you have a diagnostic tool: check in live data that the servo pressure switch changes state when the steering wheel is turned to full lock
    4. 4Check that the relevant fuses are intact, for example in the fuse box
    5. 5If the fault remains, have a workshop check the servo pressure switch and the hydraulic pressure system

    Symptome, die Sie bemerken können1

    • No noticeable symptoms for the driver

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.