Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-1822
    VOLVO

    ECM-1822 - Fuel pressure control valve. Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S40 (1996–2004), V40 (1996–2004)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo S40 (1996–2004)2001–2004Nur Motor: D4192T3, D4192T4
    • Volvo V40 (1996–2004)2001–2004Nur Motor: D4192T3, D4192T4

    Was bedeutet der Fehlercode?

    The ECM drives the fuel pressure control valve with pulse width. If the control signal is too low, for example through a break or a short to ground, fault code ECM-1822 is set.

    Mögliche Ursachen

    • Control signal wire shorted to ground
    • Open circuit in the control signal wire
    • Supply wire shorted to ground

    Was Sie tun können

    1. 1Switch off the ignition and check the connector to the fuel pressure control valve for play, contact resistance and oxidation
    2. 2With a multimeter, check that the control and supply wires to the valve are not broken and not shorted to ground
    3. 3If you have a diagnostic tool: activate the fuel pressure control valve and check that it responds
    4. 4If the fault remains, have a workshop check the valve and its wiring

    Symptome, die Sie bemerken können2

    • The engine does not start
    • The engine stalls

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.