VOLVO
ECM-182C - Cruise control. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS40 (1996–2004), V40 (1996–2004)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The ECM reads the signals from the cruise control stalk. If it receives a combination of signals that cannot be correct, fault code ECM-182C is set.
Mögliche Ursachen
- Signal wire shorted to voltage
- Signal wire shorted to ground
- Open circuit in the signal wire
- Defective cruise control stalk
Was Sie tun können
- 1Switch off the ignition and check the connections to the cruise control stalk. Look for damage and play
- 2With a multimeter, check that the signal wires from the stalk are not shorted to voltage or ground and are not broken
- 3Try every position on the cruise control stalk and see whether each gives the right function
- 4If the fault remains, have a workshop replace the cruise control stalk
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.