VOLVO
ECM-182E - Injector 1. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS40 (1996–2004), V40 (1996–2004)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The ECM drives the injector for cylinder 1 over a control signal wire. If the signal is faulty, or the control module has an internal fault, fault code ECM-182E is set.
Mögliche Ursachen
- Control signal wire shorted to voltage
- Control signal wire shorted to ground
- Open circuit in the control signal wire
- Defective injector
- Defective engine control module
Was Sie tun können
- 1Switch off the ignition and check the connector to the cylinder 1 injector for play, contact resistance and oxidation
- 2With a multimeter, check that the control wire to the injector is not broken and not shorted to ground or voltage
- 3If the injector and wiring are fine, the fault may be in the control module. Clear the code and see whether it returns
- 4If the fault remains, have a workshop replace the cylinder 1 injector or check the control module
Symptome, die Sie bemerken können2
- The engine does not start
- The engine does not run on all cylinders
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.