VOLVO
ECM-1889 - Stop shutter. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS40 (1996–2004), V40 (1996–2004)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The engine control module (ECM) controls the stop shutter valve, which regulates the vacuum to the stop shutter in the intake. The stop shutter closes the intake when the engine is switched off, for a smoother shutdown. The code is set when the ECM registers that the signal on the control wire to the valve is too low. The cause may be an open circuit or a short to ground in the wire, or a defective valve.
Mögliche Ursachen
- Open circuit in the control wire to the stop shutter valve
- Control wire short-circuited to ground
- Defective stop shutter valve
Was Sie tun können
- 1Read and clear the fault code and check whether it returns
- 2Check the fuse for the stop shutter valve, which has power even when the ignition is off
- 3Check the connector at the stop shutter valve for play and corrosion
- 4Use a multimeter to check that the control wire has no open circuit and is not short-circuited to ground (body)
- 5If you have a diagnostic tool, activate the stop shutter valve and listen for it working
- 6Have a workshop replace the stop shutter valve if the fault remains
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.