Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-1912
    VOLVO

    ECM-1912 - Reverse Lamp Control Circuit High

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    3 Modelle

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo C30 (2007–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
    • Volvo C30 (2007–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3, B4204S4
    • Volvo S40 (2004–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
    • Volvo S40 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
    • Volvo V50 (2004–2013)2008–2009Nur Motor: B4184S11, B4184S8, B4204S3
    • Volvo V50 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
    • Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4

    Was bedeutet der Fehlercode?

    The engine control module (ECM) monitors the signal for the reversing lamp. If the signal is faulty the code is set, and a typical sign is that the reversing lamp stays on all the time. The fault can come from an open circuit or a short to ground or supply voltage in the wire, or from poor contact in the connections.

    Mögliche Ursachen

    • Open circuit in the wire
    • Wire short-circuited to ground
    • Wire short-circuited to supply voltage
    • Contact resistance or oxidation in the connections
    • Open or short circuit in the connections

    Was Sie tun können

    1. 1Read and clear the fault code and check whether it returns
    2. 2Check that the fuse for the reversing lamps is intact
    3. 3Check the connectors at the reversing lamp and in the rear wiring harness for play, oxidation and corrosion
    4. 4Use a multimeter to check that the wire to the reversing lamp has no open circuit and is not short-circuited to ground or supply voltage
    5. 5If you have a diagnostic tool, follow the reversing lamp state in live data when you select reverse and back out of it

    Symptome, die Sie bemerken können1

    • The reversing lamp is lit all the time

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.