VOLVO
ECM-2110 - Front heated oxygen sensor (HO2S), heating. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)
Modelle nach Baujahr und Motor anzeigen (19)
- Volvo C70 Cabriolet (1998–2005)2000Nur Motor: B5244S
- Volvo C70 Coupé (1998–2002)1999Nur Motor: B5254S DENSO
- Volvo C70 Coupé (1998–2002)2000Nur Motor: B5244S
- Volvo S60 (2001–2009)2001, 2009Nur Motor: B5244S, B5244S2
- Volvo S60 (2001–2009)2002Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2003–2005Nur Motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2006Nur Motor: B5244S, B5244S2, B5244S6, B5244SG
- Volvo S60 (2001–2009)2007–2008Nur Motor: B5244S, B5244S2, B5244SG
- Volvo S70 (1997–2000)1999Nur Motor: B5254S DENSO
- Volvo S70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)1999–2000Nur Motor: B5244S, B5244S2
- Volvo S80 (1999–2006)2001, 2006Nur Motor: B5244S, B5244S2, B5244SG
- Volvo S80 (1999–2006)2002–2005Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (1997–2000)1999Nur Motor: B5254S DENSO
- Volvo V70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2001, 2007–2008Nur Motor: B5244S, B5244S2, B5244SG
- Volvo V70 (2000–2008)2002Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2003–2005Nur Motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2006Nur Motor: B5244S, B5244S2, B5244S6, B5244SG
Was bedeutet der Fehlercode?
The engine control module (ECM) checks the heater circuit of the front oxygen sensor shortly after the ignition is switched on. If the circuit is short-circuited to ground or supply voltage, or has an open circuit, the code is set. The fault can come from the wiring to the sensor or from a damaged sensor.
Mögliche Ursachen
- Signal wire short-circuited to supply voltage
- Open circuit in the signal wire
- Signal wire short-circuited to ground
- Damaged oxygen sensor or damaged sensor control circuit
Was Sie tun können
- 1Read and clear the fault code and check whether it returns
- 2Check that the connector at the front oxygen sensor is firmly seated and free from oxidation; do not use penetrating spray or grease on it
- 3Check the wiring to the oxygen sensor for chafing, pinch damage and loose contacts
- 4Use a multimeter to check that the heater wire to the oxygen sensor has no open circuit and is not short-circuited to ground or supply voltage
- 5Have a workshop replace the oxygen sensor if the fault remains after these checks
Symptome, die Sie bemerken können1
- The malfunction indicator lamp (MIL) is lit
Was der Fehler beeinflussen kann1
- Fuel trim and the front sensor heater are switched off after repeated restart attempts by the sensor control
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.