Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-220B
    VOLVO

    ECM-220B - Rear heated oxygen sensor (HO2S). Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    7 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008)

    Modelle nach Baujahr und Motor anzeigen (11)
    • Volvo C30 (2007–2013)2007–2011Nur Motor: B5244S4
    • Volvo C70 (2006–2013)2006Alle Motoren außer: B5254T3
    • Volvo C70 (2006–2013)2007–2010Nur Motor: B5244S4, B5244S5
    • Volvo C70 (2006–2013)2011Nur Motor: B5244S4
    • Volvo S40 (2004–2013)2005–2010Nur Motor: B5244S4, B5244S5, B5244S7
    • Volvo S60 (2001–2009)2005–2006Nur Motor: B5244S, B5244S2, B5244S6
    • Volvo S60 (2001–2009)2007–2009Nur Motor: B5244S, B5244S2
    • Volvo S80 (1999–2006)2005–2006Nur Motor: B5244S, B5244S2
    • Volvo V50 (2004–2013)2005–2010Nur Motor: B5244S4, B5244S5, B5244S7
    • Volvo V70 (2000–2008)2005–2006Nur Motor: B5244S, B5244S2, B5244S6
    • Volvo V70 (2000–2008)2007–2008Nur Motor: B5244S, B5244S2

    Was bedeutet der Fehlercode?

    The engine control module continuously monitors the voltage from the rear oxygen sensor and treats it as a fault when the voltage is outside the expected range, here too low. The fault can lie in the signal wire, in the connectors or in the sensor.

    Mögliche Ursachen

    • Signal wire shorted to ground
    • Open circuit in the signal wire
    • Contact resistance and oxidation in the connections
    • Damaged rear oxygen sensor

    Was Sie tun können

    1. 1Have a diagnostic tool? Read the fault status after the engine has idled for a while; if the fault is still present it is permanent
    2. 2Check the connector on the rear oxygen sensor for contact resistance and oxidation
    3. 3Inspect the wiring for chafing, pinching and breaks
    4. 4Use a multimeter to check that the signal wire is not shorted to ground or voltage
    5. 5If the fault remains, have a workshop try a new rear oxygen sensor

    Symptome, die Sie bemerken können1

    • The malfunction indicator lamp (MIL) comes on

    Was der Fehler beeinflussen kann1

    • Control using the rear oxygen sensor is switched off

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.