VOLVO
ECM-2300 - Injector cylinder 1. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)
Modelle nach Baujahr und Motor anzeigen (19)
- Volvo C70 Cabriolet (1998–2005)2000Nur Motor: B5244S
- Volvo C70 Coupé (1998–2002)1999Nur Motor: B5254S DENSO
- Volvo C70 Coupé (1998–2002)2000Nur Motor: B5244S
- Volvo S60 (2001–2009)2001, 2009Nur Motor: B5244S, B5244S2
- Volvo S60 (2001–2009)2002Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2003–2005Nur Motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2006Nur Motor: B5244S, B5244S2, B5244S6, B5244SG
- Volvo S60 (2001–2009)2007–2008Nur Motor: B5244S, B5244S2, B5244SG
- Volvo S70 (1997–2000)1999Nur Motor: B5254S DENSO
- Volvo S70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)1999–2000Nur Motor: B5244S, B5244S2
- Volvo S80 (1999–2006)2001, 2006Nur Motor: B5244S, B5244S2, B5244SG
- Volvo S80 (1999–2006)2002–2005Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (1997–2000)1999Nur Motor: B5254S DENSO
- Volvo V70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2001, 2007–2008Nur Motor: B5244S, B5244S2, B5244SG
- Volvo V70 (2000–2008)2002Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2003–2005Nur Motor: B5244S, B5244S2, B5244S6, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2006Nur Motor: B5244S, B5244S2, B5244S6, B5244SG
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the injector control wire for cylinder 1. The code is set when the signal reads high, reads low or is absent. The fault can be intermittent and sometimes comes from poor contact in the injector connector.
Mögliche Ursachen
- Contact resistance or oxidation in the injector connector
- Signal wire short-circuited to supply voltage
- Signal wire short-circuited to ground
- Open circuit in the signal wire
- Damaged injector
Was Sie tun können
- 1If you have a diagnostic tool: activate the injector for cylinder 1 and listen for a click from the injector when it is activated
- 2Check that the connector to the cylinder 1 injector is secure and free from oxidation and contact resistance
- 3Use a multimeter to check that the wire to the injector has no break and is not shorted to ground or supply voltage
- 4Clear the code and road test to see whether it returns once the connector has been checked
- 5If the fault remains, have a workshop check the injector and its wiring
Symptome, die Sie bemerken können3
- Malfunction indicator lamp (MIL) lit
- Engine not firing on all cylinders
- Engine cranks normally yet refuses to start
Was der Fehler beeinflussen kann1
- Lambda control is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.