VOLVO
ECM-2301 - Ignition coil 1. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (3)
Was bedeutet der Fehlercode?
The engine control module (ECM) keeps watch over the ignition circuitry. The code is set when the signal from ignition coil 1, which feeds cylinders 1 and 4, reads too high. The fault may lie in the coil or in its primary wire, for example if that wire has touched a live supply.
Mögliche Ursachen
- Primary wire has been short-circuited to supply voltage
- Damaged ignition coil
Was Sie tun können
- 1Read and clear the code, then road test to see whether it returns
- 2Check that the connector on the ignition coil is secure and not corroded
- 3Look for chafing or a pinched cable on the primary wire where it may have touched a live part
- 4If you have a diagnostic tool: watch the ignition coil 1 signal in live data while the engine runs and see whether it reads too high
- 5If the fault remains after these checks, have a workshop decide whether the coil should be replaced
Symptome, die Sie bemerken können1
- Malfunction indicator lamp (MIL) lit
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.