VOLVO
ECM-2310 - Injector cyl 1. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
8 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (26)
- Volvo C30 (2007–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008, 2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2009Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2007Nur Motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Nur Motor: D4164T
- Volvo S40 (2004–2013)2006Nur Motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008, 2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2009Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2006Nur Motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008, 2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V50 (2004–2013)2009Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the signal to the injector for cylinder 1 and checks that it works. A signal that reads high, reads low or is faulty sets the code. The fault can be in the injector or in the wiring between the injector and the control module.
Mögliche Ursachen
- Signal wire short-circuited to supply voltage
- Signal wires short-circuited to each other
- Signal wire short-circuited to ground
- Open circuit in the signal wire
- Contact resistance or oxidation in the connectors
- Damaged injector
Was Sie tun können
- 1Check that the connector to the cylinder 1 injector is secure and free from oxidation and contact resistance
- 2Use a multimeter to check that the signal wire to the injector has no break and is not shorted to ground or supply voltage
- 3If you have a diagnostic tool: activate the cylinder 1 injector and listen for a click from the injector
- 4Check that the wiring in the engine bay is intact and not chafed, especially where it connects to the injector
- 5If the fault remains, have a workshop check the injector and its wiring
Symptome, die Sie bemerken können2
- Engine fails to start
- Message in the display
Was der Fehler beeinflussen kann1
- Fuel injection to cylinder 1 stops
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.