VOLVO
ECM-2314 - Injector 4. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo S60 (2001–2009)2001Nur Motor: D5244T
- Volvo S60 (2001–2009)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo S60 (2001–2009)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo S80 (1999–2006)2001Nur Motor: D5244T
- Volvo S80 (1999–2006)2002–2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2001Nur Motor: D5244T
- Volvo V70 (2000–2008)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo V70 XC / XC70 (2001–2007)2003–2006Nur Motor: D5244T
- Volvo XC90 (2003–)2003–2006Nur Motor: D5244T
Was bedeutet der Fehlercode?
The engine control module (ECM) has found an electrical fault in the circuit to injector 4 while the engine was running. Each injector is driven by its own power stage inside the engine control module. The equivalent codes for the other cylinders are ECM-2311 to ECM-2315.
Mögliche Ursachen
- Open or short circuit in the wiring to injector 4
- Poor contact or corrosion in the injector connector
- Faulty injector
- Supply voltage problem, such as loose battery terminals or a charging fault
- Faulty engine control module
Was Sie tun können
- 1Check the battery terminals and that the battery and charging system work
- 2Check the injector 4 connector for poor contact, oil contamination and corrosion
- 3Inspect the injector wiring for heat or chafing damage
- 4Have a workshop test the injector and wiring; replace the injector if it is faulty
Symptome, die Sie bemerken können2
- The engine does not run on all cylinders – rough running and reduced power
- The engine may be hard to start or not start
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.